PÜRKAY SL 21 Epoxy Self Leveling

Solvent-free, colorful, easy to spread, high mechanical strength, aesthetic, three-component epoxy self leveling coating

Characteristics

It is a solvent-free, self-leveling, epoxy-based floor covering material with high mechanical strength and chemical resistance. It shows excellent resistance to chemicals, is resistant to friction and abrasion, creates a joint-free surface, is easy to clean, hygienic, does not require maintenance for a long time, is easy to apply, does not contain solvents.

Specifications

Mixing ratio : By weight: A/B/C: 40/10/50
Pot life: 35±5 Minutes /23ºC, 200 g. DIN 16945
Consumption: 1.85 kg for 1 mm thickness.
Density (Mixture): A+B : 1.40 ± 0.05 gr/cm³ 20ºC TS EN ISO 2811-1
Solids Ratio (%): 100 by weight
100 by volume
Viscosity : 1500 ± 500 mPas
VOC: A+B :< 240g/L*
TOC: %46-50
Shore D : 75 ± 5
Application Thinner: not thinned
Method of Application : Trowel, Rakel
Drying Time: Powder Drying : 3-4 hours at 23ºC TS 4317
Touch Dry: 10-12 hours at 23ºC TS 4317
Full Arming: 7 days at 23ºC TS 4317
Fire Resistance: It has obtained positive results from the inspections and tests carried out according to TS EN ISO 11925-2 numbered Turkish Standards and TS EN ISO 11925-2:2004-4. **
Non-slip: Dry : R13 Wet : R 13 DIN 51131
Anti-slip scot: Dry : 0.92 Wet : 1.07 ASM 825
Storage : Storage period is 1 year when stored in its original packaging, protected from frost and below 35ºC.
Packaging : A/B/C: 10.0/ 2.5/ 12.5 = 25 kg tool
Cleaning : 314 Cleaner

* EU regulation 2004/42: According to EU Directive 2004/42, maximum volatile organic compound (voc) content allowed in ready-to-use product is 550/500 g/L. (2007/2010 limits)

** Report No: AB-0001-T 80802 Tested samples TS EN 13501-1/ JANUARY 2010 Table 2. It complies with the EFL class criteria.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.